Heavy Material Rack Flattening Feeding Stamping Peripheral Equipment CE ISO Certification

Heavy Material Rack Flattening Feeding Stamping Peripheral Equipment CE ISO Certification

 
Maintenance of heavy material racks:
 
1. Check the installation status of the gear transmission system (such as centering, meshing clearance, foundation fastening), the matching clearance of the tile and the level of the base of the external support rocker before the daily operation of the heavy material frame.
 
2. Visually inspect the material rack cylinder every week to detect whether it leaks, whether the pressure and flow of the hydraulic system are normal, and whether the hydraulic cylinder of the outer support rocker is working properly.
 
3. Weekly use the dial gauge to inspect and expand the diameter and tile vibration of the material rack, and disassemble the reel at the same time, check the wear of the quadrangular pyramid, the lining plate and the mandrel in the drum, and timely carry out the condition. Repair or replace.
 
4. Use the flowmeter to check the grease leakage of the reducer coupling of the material frame and the flow rate of the lubrication pump every week, and check the working position of the gearbox lubricating oil level, flow rate and lubrication pump; add according to the lubrication situation. lubricating oil.
 

 
5. Check the lubrication of the sliding parts of the material frame and the grease of the coupling pin by visual inspection every week, and the wear of the tile.
 
6. Disassemble the rack gear every 6 months, check the tooth surface wear (check for pitting, peeling, broken teeth, etc.) and lubrication.
 
 
Specifications:

Straightening Performance:

Products: